®5,343,838 The color red, as it relates to buckets for agricultural and light industrial elevator type conveyors is a United States registered trademark of Maxi-Lift Inc.
HD-MAX
- Thicker Walls, Heavy Front Lip for Digging
- High Impact & Abrasion Resistant
- Non-Corrosive, Non-Sparking
- Extended Bucket Life
- Increases Elevator Capacity
- Cleaner Discharge
- Lowers Elevator Maintenance
- Decreases Elevator Down Time
HD-MAX LOW PROFILE OPTION
The HD-MAX Hy-Pro bucket has a reduced height modification for closer vertical spacing on the belt. The low profile system allows more buckets per foot of elevator belt. When upgrading to HD-MAX Heavy Duty Hy-Pro buckets, horsepower requirements must be evaluated due to increased capacity.
HIGHER CAPACITY MEANS HD-MAX
Elevate more material faster to meet higher capacity demands.
MOUNTING HOLES AND VENTING TO YOUR SPECIFICATIONS
HD-Max
| BUCKET SIZE | PUNCHING | WEIGHT | CAPACITY | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Length | Proj | Depth | Backwall Thickness | Centers | # of Holes | Bolt Size | Top Down | Poly | Nylon | Urethane | Water Level X-X | Useable 5 ° Over X-5° | Std Spacing | Carton Qty |
| Dimensions | in | in | in | in | in | No. | in | in | lbs | lbs | lbs | cu in | cu in | in | Pcs. |
| 3 x 2 | 3.25 | 2.3125 | 2.25 | 0.17 | 1.75 | 2 | 0.25 | 0.875 | 0.12 | 0.15 | 0.2 | 6.71 | 7.93 | 4 | 120 |
| 4 x 3 | 4.375 | 3.25 | 3 | 0.17 | 2.25 | 2 | 0.25 | 0.875 | 0.22 | 0.25 | 0.3 | 15.26 | 17.7 | 5 | 120 |
| 5 x 4 | 5.25 | 4.5 | 4 | 0.3 | 3.1875 | 2 | 0.25 | 1.125 | 0.47 | 0.6 | 0.75 | 36.2 | 39.82 | 6 | 36 |
| 6 x 4 | 6.25 | 4.5 | 4 | 0.3 | 4.375 | 2 | 0.25 | 1.125 | 0.56 | 0.7 | 0.85 | 44.2 | 49.58 | 6 | 40 |
| 7 x4 | 7.25 | 4.5 | 4 | 0.3 | 2.625 | 3 | 0.25 | 1.125 | 0.66 | 0.8 | 0.88 | 51.31 | 57.01 | 6 | 30 |
| 6 x 5 | 6.375 | 5.625 | 5 | 0.3 | 4.375 | 2 | 0.25 | 1.625 | 0.88 | 0.85 | 1 | 67.2 | 73.98 | 7 | 24 |
| 7 x 5 | 7.375 | 5.625 | 5 | 0.3 | 2.625 | 3 | 0.25 | 1.625 | 0.98 | 0.95 | 1.15 | 79.72 | 89.24 | 7 | 24 |
| 8 x 5 | 8.375 | 5.625 | 5 | 0.3 | 3.0625 | 3 | 0.25 | 1.625 | 1.15 | 1.3 | 1.55 | 102.85 | 115.85 | 7 | 35 |
| 9 x 5 | 9.375 | 5.625 | 5 | 0.3 | 3.5 | 3 | 0.25 | 1.625 | 1.2 | 1.2 | 1.4 | 107.37 | 121.27 | 7 | 27 |
| 10 x 5 | 10.25 | 5.625 | 5 | 0.3 | 4 | 3 | 0.25 | 1.625 | 1.26 | 1.4 | 1.7 | 121.3 | 138.89 | 7 | 27 |
| 11 x 5 | 11.25 | 5.625 | 5 | 0.3 | 3.125 | 4 | 0.25 | 1.625 | 1.37 | 1.55 | 1.85 | 140.7 | 153.16 | 7 | 27 |
| 12 x 5 | 12.25 | 5.625 | 5 | 0.3 | 3.375 | 4 | 0.25 | 1.625 | 1.55 | 1.7 | 2.12 | 159.87 | 167.14 | 7 | 27 |
| 8 x 6 | 8.375 | 6.625 | 6 | 0.3 | 3.0625 | 3 | 0.25 | 1.625 | 1.35 | 1.65 | 1.95 | 135.56 | 150.85 | 8 | 18 |
| 9 x 6 | 9.375 | 6.625 | 6 | 0.3 | 3.5 | 3 | 0.25 | 1.625 | 1.53 | 1.75 | 2.1 | 150.26 | 165.87 | 8 | 18 |
| 10 x 6 | 10.375 | 6.625 | 6 | 0.3 | 4 | 3 | 0.25 | 1.625 | 1.64 | 1.85 | 2.3 | 170.69 | 185.62 | 8 | 18 |
| 11 x 6 | 11.375 | 6.625 | 6 | 0.3 | 3 | 4 | 0.25 | 1.625 | 1.82 | 2.05 | 2.45 | 185.18 | 200.36 | 8 | 18 |
| 12 x 6 | 12.375 | 6.625 | 6 | 0.3 | 3.375 | 4 | 0.25 | 1.625 | 1.89 | 2.15 | 2.65 | 200.37 | 220.58 | 8 | 18 |
| 13 x 6 | 13.375 | 6.625 | 6 | 0.3 | 3.625 | 4 | 0.25 | 1.625 | 2.04 | 2.35 | 2.85 | 220.78 | 240.48 | 8 | 18 |
| 10 x 7 | 10.5 | 7.75 | 7.125 | 0.33 | 4 | 3 | 0.3125 | 1.875 | 2.35 | 2.68 | 3.25 | 240.91 | 264.59 | 9 | 14 |
| 11 x 7 | 11.5 | 7.75 | 7.125 | 0.33 | 3 | 4 | 0.3125 | 1.875 | 2.55 | 2.85 | 3.45 | 269.32 | 292.41 | 9 | 14 |
| 12 x 7 | 12.5 | 7.75 | 7.125 | 0.33 | 3.375 | 4 | 0.3125 | 1.875 | 2.73 | 3.2 | 3.8 | 292.41 | 319.63 | 9 | 14 |
| 13 x 7 | 13.5 | 7.75 | 7.125 | 0.33 | 3.625 | 4 | 0.3125 | 1.875 | 2.89 | 3.25 | 3.85 | 344.2 | 356.4 | 9 | 12 |
| 14 x 7 | 14.5 | 7.75 | 7.125 | 0.33 | 3 | 5 | 0.3125 | 1.875 | 3.1 | 3.45 | 4.25 | 356.4 | 389.9 | 9 | 12 |
| 15 x 7 | 15.5 | 7.75 | 7.125 | 0.33 | 3.25 | 5 | 0.3125 | 1.875 | 3.23 | 3.71 | 4.36 | 379.5 | 408.2 | 9 | 12 |
| 16 x 7 | 16.5 | 7.75 | 7.125 | 0.33 | 3.5 | 5 | 0.3125 | 1.875 | 3.37 | 3.9 | 4.6 | 406.4 | 432 | 9 | 12 |
| 10 x 8 | 10.5 | 8.75 | 8 | 0.4 | 4.125 | 3 | 0.3125 | 2 | 2.89 | 3.29 | 4.1 | 328.52 | 353.97 | 10 | 10 |
| 11 x 8 | 11.5 | 8.75 | 8 | 0.4 | 3.125 | 4 | 0.3125 | 2 | 3.17 | 3.55 | 4.34 | 358.11 | 388.3 | 10 | 10 |
| 12 x 8 | 12.5 | 8.75 | 8 | 0.4 | 3.375 | 4 | 0.3125 | 2 | 3.46 | 4 | 4.65 | 390.67 | 423.22 | 10 | 10 |
| 14 x 8 | 14.5 | 8.75 | 8 | 0.4 | 3 | 5 | 0.3125 | 2 | 3.86 | 4.35 | 5.3 | 465 | 502.8 | 10 | 10 |
| 15 x 8 | 15.5 | 8.75 | 8 | 0.4 | 3.25 | 5 | 0.3125 | 2 | 4.06 | 4.67 | 5.55 | 511.3 | 541.9 | 10 | 10 |
| 16 x 8 | 16.5 | 8.75 | 8 | 0.4 | 3.5 | 5 | 0.3125 | 2 | 4.26 | 4.7 | 5.6 | 543.1 | 571.1 | 10 | 10 |
| 18 x 8 | 18.5 | 8.75 | 8 | 0.4 | 3.125 | 6 | 0.3125 | 2 | 4.66 | 5.1 | 610.2 | 648 | 10 | 10 | |
MOUNTING HOLES AND VENTING TO YOUR SPECIFICATIONS
HD-Max (Low Profile)
| BUCKET SIZE | PUNCHING | WEIGHT | CAPACITY | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Length | Proj | Depth | Backwall Thickness | Centers | # of Holes | Bolt Size | Top Down | Poly | Nylon | Urethane | Water Level X-X | Useable 5 ° Over X-5° | Std Spacing | Carton Qty. |
| Dimensions | in | in | in | in | in | No. | in | in | lbs | lbs | lbs | cu in | cu in | in | Pcs. |
| 3 x 2 | 3.25 | 2.3125 | 2.25 | 0.17 | 1.75 | 2 | 0.25 | 0.875 | 0.11 | 0.13 | 0.15 | 6.71 | 7.93 | 2.25 | 120 |
| 4 x 3 | 4.375 | 3.25 | 2.75 | 0.17 | 2.25 | 2 | 0.25 | 0.875 | 0.19 | 0.22 | 0.29 | 15.26 | 17.7 | 2.75 | 120 |
| 5 x 4 | 5.25 | 4.5 | 3.25 | 0.3 | 3.1875 | 2 | 0.25 | 1.125 | 0.42 | 0.49 | 0.65 | 36.2 | 39.82 | 3.25 | 42 |
| 6 x 4 | 6.25 | 4.5 | 3.5 | 0.3 | 4.375 | 2 | 0.25 | 1.125 | 0.49 | 0.57 | 0.73 | 44.2 | 49.58 | 3.5 | 42 |
| 7 x4 | 7.25 | 4.5 | 3.5 | 0.3 | 2.625 | 3 | 0.25 | 1.125 | 0.57 | 0.66 | 0.86 | 51.31 | 57.01 | 3.5 | 42 |
| 6 x 5 | 6.375 | 5.625 | 4 | 0.3 | 4.375 | 2 | 0.25 | 1.625 | 0.67 | 0.76 | 0.91 | 67.2 | 73.98 | 4 | 30 |
| 7 x 5 | 7.375 | 5.625 | 4 | 0.3 | 2.625 | 3 | 0.25 | 1.625 | 0.72 | 0.84 | 1.09 | 79.72 | 89.24 | 4 | 30 |
| 8 x 5 | 8.375 | 5.625 | 4 | 0.3 | 3.0625 | 3 | 0.25 | 1.625 | 1.09 | 0.87 | 1.15 | 102.85 | 115.85 | 4 | 30 |
| 9 x 5 | 9.375 | 5.625 | 4 | 0.3 | 3.5 | 3 | 0.25 | 1.625 | 1.14 | 1.15 | 1.35 | 107.37 | 121.27 | 4 | 30 |
| 10 x 5 | 10.25 | 5.625 | 4.5 | 0.3 | 4 | 3 | 0.25 | 1.625 | 1.18 | 1.37 | 1.7 | 121.3 | 138.89 | 4.5 | 30 |
| 11 x 5 | 11.25 | 5.625 | 4.5 | 0.3 | 3.125 | 4 | 0.25 | 1.625 | 1.24 | 1.44 | 1.82 | 140.7 | 153.16 | 4.5 | 30 |
| 12 x 5 | 12.25 | 5.625 | 4.5 | 0.3 | 3.375 | 4 | 0.25 | 1.625 | 1.32 | 1.53 | 2.06 | 159.87 | 167.14 | 4.5 | 30 |
| 8 x 6 | 8.375 | 6.625 | 5 | 0.3 | 3.0625 | 3 | 0.25 | 1.625 | 1.24 | 1.41 | 1.7 | 135.56 | 150.85 | 5 | 22 |
| 9 x 6 | 9.375 | 6.625 | 5 | 0.3 | 3.5 | 3 | 0.25 | 1.625 | 1.39 | 1.59 | 1.91 | 150.26 | 165.87 | 5 | 21 |
| 10 x 6 | 10.375 | 6.625 | 5 | 0.3 | 4 | 3 | 0.25 | 1.625 | 1.48 | 1.68 | 2.02 | 170.69 | 185.62 | 5 | 21 |
| 11 x 6 | 11.375 | 6.625 | 5 | 0.3 | 3 | 4 | 0.25 | 1.625 | 1.66 | 1.89 | 2.28 | 185.18 | 200.36 | 5 | 21 |
| 12 x 6 | 12.375 | 6.625 | 5 | 0.3 | 3.375 | 4 | 0.25 | 1.625 | 1.73 | 1.96 | 2.36 | 200.37 | 220.58 | 5 | 21 |
| 13 x 6 | 13.375 | 6.625 | 5 | 0.3 | 3.625 | 4 | 0.25 | 1.625 | 1.86 | 2.12 | 2.55 | 220.78 | 240.48 | 5 | 22 |
| 10 x 7 | 10.5 | 7.75 | 6 | 0.33 | 4 | 3 | 0.3125 | 1.875 | 2.17 | 2.47 | 2.97 | 240.91 | 264.59 | 6 | 15 |
| 11 x 7 | 11.5 | 7.75 | 6 | 0.33 | 3 | 4 | 0.3125 | 1.875 | 2.32 | 2.64 | 3.18 | 269.32 | 292.41 | 6 | 15 |
| 12 x 7 | 12.5 | 7.75 | 6 | 0.33 | 3.375 | 4 | 0.3125 | 1.875 | 2.54 | 2.9 | 3.48 | 292.41 | 319.63 | 6 | 15 |
| 13 x 7 | 13.5 | 7.75 | 6 | 0.33 | 3.625 | 4 | 0.3125 | 1.875 | 2.63 | 3.02 | 3.55 | 344.2 | 356.4 | 6 | 15 |
| 14 x 7 | 14.5 | 7.75 | 6 | 0.33 | 3 | 5 | 0.3125 | 1.875 | 2.85 | 3.28 | 3.85 | 356.4 | 389.9 | 6 | 15 |
| 15 x 7 | 15.5 | 7.75 | 6 | 0.33 | 3.25 | 5 | 0.3125 | 1.875 | 3.01 | 3.46 | 4.06 | 379.5 | 408.2 | 6 | 15 |
| 16 x 7 | 16.5 | 7.75 | 6 | 0.33 | 3.5 | 5 | 0.3125 | 1.875 | 3.12 | 3.59 | 4.21 | 406.4 | 432 | 6 | 15 |
| 10 x 8 | 10.5 | 8.75 | 6 | 0.4 | 4.125 | 3 | 0.3125 | 2 | 2.58 | 2.94 | 3.53 | 328.52 | 353.97 | 7 | 12 |
| 11 x 8 | 11.5 | 8.75 | 6.75 | 0.4 | 3.125 | 4 | 0.3125 | 2 | 2.85 | 3.25 | 3.9 | 358.11 | 388.3 | 7 | 12 |
| 12 x 8 | 12.5 | 8.75 | 6.75 | 0.4 | 3.375 | 4 | 0.3125 | 2 | 3.15 | 3.59 | 4.32 | 390.67 | 423.22 | 7 | 12 |
| 14 x 8 | 14.5 | 8.75 | 6.75 | 0.4 | 3 | 5 | 0.3125 | 2 | 3.51 | 4.04 | 4.74 | 465 | 502.8 | 7 | 12 |
| 15 x 8 | 15.5 | 8.75 | 6.75 | 0.4 | 3.25 | 5 | 0.3125 | 2 | 3.67 | 4.22 | 4.95 | 511.3 | 541.9 | 7 | 12 |
| 16 x 8 | 16.5 | 8.75 | 6.75 | 0.4 | 3.5 | 5 | 0.3125 | 2 | 3.79 | 4.36 | 5.12 | 543.1 | 571.1 | 7 | 12 |
| 18 x 8 | 18.5 | 8.75 | 6.75 | 0.4 | 3.125 | 6 | 0.3125 | 2 | 4.24 | 4.88 | 610.2 | 648 | 7 | 12 | |
Digger elevator buckets aid in breaking up material in the boot section of a bucket elevator. Diggers extend 1/4″ further than plastic elevator buckets. Weights and dimensions will vary. Tolerance is a 1/4″ on all bucket dimensions except bolt hole diameter which is 1/16″. Capacity is based off of plastic elevator buckets of similar style. Buckets available in carbon or stainless steel. Additional AR wear lips, back plates and venting available upon request. Buckets available in other gauges including 14GA, 12GA, 10GA, 7GA, 1/4″ thick.
HD-Max Steel Digger
| Bucket Size, Inches | Punching, Inches | Weight, Lbs. | Capacity, Cu. Inches | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Length (L) | Proj. (P) | Depth (D) | Centers (E) | # Of Holes | Bolt Size | 10 GA Carbon Steel | Water Level (X-X) | Water Level +5° |
| 3X2 | 3.75 | 2.5625 | 2.25 | 1.75 | 2 | 42373 | 1.9 | 6.71 | 7.93 |
| 4X3 | 4.875 | 3.5 | 3 | 2.25 | 2 | 42373 | 3.3 | 15.26 | 17.7 |
| 5X4 | 5.75 | 4.75 | 4 | 3.1875 | 2 | 42373 | 4.8 | 36.61 | 40.27 |
| 6X4 | 6.75 | 4.75 | 4 | 4.375 | 2 | 42373 | 5.2 | 45.15 | 50.65 |
| 7X4 | 7.75 | 4.75 | 4 | 2.625 | 3 | 42373 | 5.9 | 54.92 | 61.02 |
| 6X5 | 6.875 | 5.875 | 5 | 4.375 | 2 | 42373 | 7.4 | 66.51 | 73.22 |
| 7X5 | 7.875 | 5.875 | 5 | 2.625 | 3 | 42373 | 7.8 | 81.77 | 91.53 |
| 8X5 | 8.875 | 5.875 | 5 | 3.0625 | 3 | 42373 | 10.6 | 91.53 | 101.29 |
| 9X5 | 9.875 | 5.875 | 5 | 3.5 | 3 | 42373 | 10.8 | 103.73 | 117.16 |
| 10X5 | 10.75 | 5.875 | 5 | 4 | 3 | 42373 | 9.2 | 122.04 | 139.74 |
| 11X5 | 11.75 | 5.875 | 5 | 3.125 | 4 | 42373 | 9.7 | 141.26 | 153.77 |
| 12X5 | 12.75 | 5.875 | 5 | 3.375 | 4 | 42373 | 10.3 | 161.09 | 168.42 |
| 8X6 | 8.875 | 6.875 | 6 | 3.0625 | 3 | 42373 | 10.2 | 134.24 | 152.55 |
| 9X6 | 9.875 | 6.875 | 6 | 3.5 | 3 | 42373 | 10.6 | 146.45 | 169.03 |
| 10X6 | 10.875 | 7.125 | 6.125 | 4 | 3 | 42373 | 11.6 | 194.04 | 219.67 |
| 11X6 | 11.875 | 7.125 | 6.125 | 3 | 4 | 42373 | 12.4 | 181.84 | 200.15 |
| 12X6 | 12.875 | 7.125 | 6 | 3.375 | 4 | 42373 | 12.9 | 198.01 | 231.88 |
| 13X6 | 13.875 | 7.125 | 6 | 3.625 | 4 | 42373 | 13.7 | 223.33 | 255.06 |
| 10X7 | 10.75 | 8 | 7.125 | 4 | 3 | 42506 | 14.5 | 240.91 | 264.59 |
| 11X7 | 11.75 | 8 | 7.125 | 3 | 4 | 42506 | 15 | 269.32 | 292.41 |
| 12X7 | 12.75 | 8 | 7.125 | 3.375 | 4 | 42506 | 15.7 | 292.41 | 319.63 |
| 13X7 | 13.75 | 8 | 7.125 | 3.625 | 4 | 42506 | 16.4 | 344.2 | 356.4 |
| 14X7 | 14.75 | 8 | 7.125 | 3 | 4 | 42506 | 17 | 356.4 | 386.9 |
| 15X7 | 15.75 | 8 | 7.125 | 3.25 | 5 | 42506 | 17.5 | 379.5 | 408.2 |
| 16X7 | 16.75 | 8 | 7.125 | 3.5 | 5 | 42506 | 18.3 | 406.4 | 432 |
| 10X8 | 10.75 | 9 | 8 | 4.125 | 3 | 42506 | 17.9 | 328.52 | 353.97 |
| 11X8 | 11.75 | 9 | 8 | 3.125 | 4 | 42506 | 18.4 | 358.11 | 388.3 |
| 12X8 | 12.75 | 9 | 8 | 3.375 | 4 | 42506 | 18.9 | 390.67 | 423.22 |
| 13X8 | 13.75 | 9 | 8 | 3.625 | 4 | 42506 | 19.9 | 406.39 | 452.77 |
| 14X8 | 14.75 | 9 | 8 | 3 | 5 | 42506 | 21.3 | 465 | 502.8 |
| 15X8 | 15.75 | 9 | 8 | 3.25 | 5 | 42506 | 22.5 | 511.3 | 541.9 |
| 16X8 | 16.75 | 9 | 8 | 3.5 | 5 | 42506 | 23.1 | 543.1 | 571.1 |
| 18X8 | 18.75 | 9 | 8 | 3.125 | 6 | 42506 | 25.2 | 610.2 | 648 |
(Recommended but not restricted to handling these specific products)
Barley
Grains
Rice
Brown Sugar
Grass Seed
Salt
Coffee
Meat Scrap
Soy Beans
Corn
Nuts
Sugar
Feed
Oats
Sunflower Seeds
Flour
Pellets
Wheat
Polyethylene
Application:
Grains & Food Products
Temperature Range:
-120°F to +180°F
(210°F intermittent)
FDA Approved Material:
Yes
Comments:
Economical, high density polyethylene. FDA approved material for handling food grade products.
Nylon
Application:
Hot, high impact, abrasive dense products
Temperature Range:
-60°F to +300°F
(350°F intermittent)
FDA Approved Material:
No
Comments:
Best for high heat applications, with tough impact and abrasion needs.
Urethane
Application:
Heavy abrasion, sticky materials
Temperature Range:
-60°F to +180°F
(210°F intermittent)
FDA Approved Material:
Yes
Comments:
Most flexible and abrasion resistant. Resists product sticking and sharp cutting particles.
FDA Nylon
Application:
Hot, high impact, abrasive food grade products
Temperature Range:
-60°F to + 300°F
FDA Approved Material:
Yes
Comments:
Best for high heat food grade applications, with tough impact and abrasion needs.
Venting an elevator bucket aids in bucket fill and discharge with light, fluffy materials.
Lightweight, fluffy materials, those that are extremely dense or flow poorly can be difficult to handle in bucket elevators at high speeds. Because these materials tend to trap air when being handled by an elevator bucket, it is necessary to provide air relief to assist in their filling and discharge. Materials in this category might be various flours, meals, feed mash or screenings. As these materials enter the bucket, air is released through a series of vent holes in the bottom of the bucket allowing for a more complete fill. These vent holes also allow air to re-enter the bucket, which facilitates full release of product into the discharge.
Standard hole diameter is equal to the size of the bolt mounting holes in vent pattern #1, all other vent patterns will have 11/32” diameter holes unless otherwise requested by customer.
When elevating powdery materials such as cement in the Tiger-Tuff, a minimum of two rows of 3/8″ diameter vent holes are recommended to help insure that the material will discharge cleanly.
Same holes in body as bolt mounting holes.
#2 Vent
One row of holes on 1-1/8″centers.
#3 Vent
Two rows of holes on 1-1/8″centers.
#4 Vent
Same as #3, plus three holes in each end cap.
Custom Vent
Vented as required.
Call for Industrial Bucket venting recommendations
ADDITIONAL SPECIAL DRILLING AND VENTING CHARGES
- Drilling any diameter hole over 13/32″
- Bolt Hole centers closer than 1-3/4″
- Side drilled buckets except standard peanut buckets
- Special Venting requirements such as extra holes, change in diameter holes, etc.
- Quoted prices subject to change due to special drilling and venting requirements
CATALOGS
ARTICLES
The HD-MAX Heavy Duty elevator bucket is engineered to exceed the performance requirements of the standard bucket. This bucket is designed with thicker walls and a reinforced front lip to increase bucket life and reduce breakage. Replacing existing CC-HD or Standard Duty buckets with the HD-MAX will create longer bucket life and less frequent replacements. Standard spacing is nominal projection plus 1″, minimum spacing is nominal projection plus 1”. The most common applications include grain, fertilizer, pellets, corn, wheat, soybeans and other agricultural applications. The HD-MAX bucket stands second only to the Tiger-Tuff in strength and thickness.
Features & Benefits
- Thicker Walls, Heavy Front Lip for Digging
- High Impact & Abrasion Resistant
- Non-Corrosive, Non-Sparking
- Extended Bucket Life
- Increases Elevator Capacity
- Cleaner Discharge
- Lowers Elevator Maintenance
- Decreases Elevator Down Time
Other Considerations
Drilling: Elevator buckets are manufactured without a drill pattern. Special drilling or punching can be accommodated upon customer request.
Venting: Available as needed. See venting options in this catalog.
Digger Buckets: Use slightly larger metal digger elevator buckets to help loosen material in the elevator boot section that has set up or hardened, thereby reducing abrasion on the plastic buckets. Call for details on Metal Digger elevator bucket options.
Spacing: See elevator bucket spacing details in the size chart (depending on materials and speeds, smaller and larger spacing may be used).
Installation: Use a #1 standard elevator bolt or Sabre-Tooth elevator bolt for installation. Designed to be used with fender or flat and lock washers and hex or locking nuts. If buckets are being installed on chain, use hex head bolts, nuts and washers.
FDA: Both the urethane and polyethylene are designed to FDA specifications for direct contact with food products.
Low sides and smooth bottom
give excellent cup fill and discharge.
Contact A Sales Rep
Bo Fisher
VP of North American Sales
Byron Smith
VP of International Sales
Chris Tarver
Director of Industrial Products
Brandon Grubbs
International Sales
Sonya Fisher
Inside Sales
Jeff Jowers
Belting Manager/Sales
Josh Manuel
Inside Sales
Drew Lassiter
Inside Sales Team Leader/Inside Sales
John Windwehen
Sales
Matt Hanson
Director of Business Development
Matt Porter
Technical Sales Specialist - KS, NE, OK, MO, CO
Brad Trost
Technical Sales Specialist - MN, WI, ND, SDAgricultural Brands
